Yes, the Equal-i-zer Weight Dist Shank # EQ90-02-4900 that you mentioned will work great with your Reese Pro Series WDS.
Since your new 2022 Ford F-250 has a class V trailer hitch, with a 2-1/2" receiver, this shank will have no issues fitting in the opening.
Additionally, this shank has a maximum tongue weight capacity of 1,600-lbs, a maximum towing weight capacity of 16,000-lbs, a rise of 10", and a drop of 6". view full answer...
Thanks for reaching out again, Mike!
Yes, the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 is compatible with a hydraulic boat trailer system. It's arguably the most reliable option on the market when it comes to compatibility with electric over hydraulic brake systems so I know you'll be happy with how it performs!
You just need to make sure you have an electric over hydraulic actuator like the Hydrastar Vented Marine Electric Over Hydraulic Actuator for Drum Brakes # HS381-8065... view full answer...
To determine the correct slide out seal for your 2021 Heartland RV North Trail Travel Trailer you'll need to remove a portion of the current seal to see how it attaches and measure how wide it is.
The Rubber Wiper Seal and Bulb for RV Slide Out # SR98FR you were looking at is a great option for a top seal and applies using the adhesive backing, but I still recommend shooting a few screws in to ensure it stays in place. That being said I do still recommend checking what you already have... view full answer...
Hey Michael, thanks for reaching out!
How wide is the slide out on your 2022 heartland North Trail 28RKDS? I tried looking up the specs online but I wasn't able to locate anything about it. If you can measure the width of your slide out I can make a recommendation for you!
Attached is a photo demonstrating how to measure your slide out. view full answer...
In order to find the correct replacement leaf spring for a trailer you first need to start by noting the type whether that be slipper or double eye. Then, you'll need to measure their unloaded length via jacking up the trailer. If the springs are worn they will measure longer than their replacement. Lastly, you will need to note the axle capacity which is found on the tag in the center of the beam. Please note, the number of leaves does not really denote capacity as leaves have different... view full answer...
Thanks for reaching out!
To add a hitch to the back of your 2019 Heartland 24BHS you'll need to measure the distance between your frame and install one of our adjustable hitches. One of our more popular options is the Curt Adjustable Width Trailer Hitch Receiver # 13703 because it fits frames 22" - 72" wide and uses mounting brackets that fit a variety of frame styles.
Then when it comes to wiring I recommend adding the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector... view full answer...
The Adco Tyre Gard RV Wheel Cover # 290-3623 (camo) is 70" long x 27" high x 9" deep. This will fit around tires with 27" to 29" diameter. Usually tandem axles only vary slightly in length and the general rule of thumb is that if your tire size is on the list and you made no alteration to the tandem axle length, then the wheel cover is a fit.
With dual axle tires that are a bit further apart like yours, you might need to consider other options. If you need 78" of length, then my recommendation... view full answer...
I have a solution for you, but you will need to measure the distance between the side frame stanchions on your trailer. Assuming that your trailer frame is between 22" and 72" wide, the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703 is likely going to be the best fit since it fits on box frame, I-beam and C channel frames. This hitch can be welded on or bolted directly to the frame and it has a 350-lbs tongue weight capacity, so it's going to be perfect for a cargo... view full answer...
The MORryde 14-3/4" Shock Absorbing Equalizers for Tandem Axle Trailers part # MR34AR will work great on a 2021 Heartland RV North Trail Travel Trailer and what I recommend using. They can then be combined with the MORryde Suspension Upgrade Kit for Tandem Axle Trailers part # MR46ZR for upgraded shackle straps and wet bolts. These equalizers are rated up to 8,000 lbs so they will work great on a set of 4,400 lb axles. view full answer...
I looked up the length of your Heartland 31BHDD North Trail 2013 and found that it's 36 feet long so for a cover similar to what you referenced that does fit that size you'd want the Adco Storage Lot Cover part # 290-74847 and you'd be set. view full answer...
Hey Michael; for the newer generation 2500HD I recommend going with the 7 inch drop Tow & Stow:
- B&W Tow & Stow 2-Ball Mount - 2" Hitch - 7" Drop, 7-1/2" Rise # BWTS10040B view full answer...
The correct anode rod you'll need will be based on the water heater you have installed in your 2019 Heartland North trail. If you have a Suburban/Mor-Flo you would need the part # CAM11563 or if you have the more popular Atwood water heater you would want the part # CAM11553. We don't have a way to determine what water heater you have.
The tool you need is the part # CAM09883. view full answer...
For a replacement 5,200 lb axle we have the following options for you:
- Standard Trailer Axle Beam # e45GR
- Timbren Axle-Less Trailer Suspension # ASR5200S01
The Timbren system gives you a better suspension and bolts onto your trailer frame while that standard axle would require you to have a welder cut off and then weld on new spring seats to match your trailer frame width.
I'm attaching some review videos for you to check out! view full answer...
The Gustafson RV Puck Light # 277-000341 has a color temperature that is warm white 3200K. It has a 480 Lumen output rating from it's 18 LEDs. Although we have had some customers say it is closer to the 4000k range. I have attached a video that gives you an idea of how the light looks starting around the 1:45 mark. view full answer...
This has been asked before and unfortunately there is no replacement leg option offered by Lippert for the:
-Lippert High-Speed Power Stabilizer Jack # LC298707.
If your leg has become damaged, the only solution is to replace the entire unit. view full answer...
Yes, the Adco Tyre Gard RV Wheel Cover # 290-3622 that you referenced will fit your tandem axle setup that has 26 inch diameter tires with a 42 inch axle spacing. Based on typical axle spacings and the diameter of tire this cover was designed to work with the sizing is correct. view full answer...
Looks like you have the Pendant Light part # 277-000422 and are trying to replace the shade with the seeded glass shade part # 277-000431. I spoke with my contact at Gustafson about the install process for the shade and they sent me:
"He has to loosen the wiring from the bottom of the base and feed the socket through the glass. That is how the glass is installed. It is not meant for the end user to replace, but many have done so. Usually has to be done by a service agent." view full answer...
Yes, the Lippert Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System # LC672136 will work on your 2018 Heartland North Trail 32 RETS. The Lippert system will work on travel trailers like your Heartland that are up to 10,000lbs of GVWR. Your Heartland has a GVWR of 9,600lbs.
I recommend the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet # SP54FR4 that will attach to the 4 rear leveling jacks to give you a large footprint so your jack will... view full answer...
The Rubber Wiper Seal and Bulb for RV Slide Out # SR98FR that you referenced installs with an adhesive backing that attaches to the RV frame that surrounds the slide out. There are quite a few different setups and ways it can install though so basically you are going to have to look at your setup and determine what you have to figure out out it would need to get removed and what would be the style you'd need to replace it with. All of our options are a stick-on style of install meaning... view full answer...
Go To Results